Apeks XTX40 Regulator With DS4
The XTX40 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference(essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator).
The XTX40 regulator incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve.
The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress.
A new swivel hose connection is available at an extra cost. This allows the demand valve end of the hose connection to rotate and pivot, providing a more comfortable fit.
A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance.
Performance is calculated by plotting and recording this cycle. The inhalation line begins on the right hand side and runs along the bottom to the left. The first oscillation (termed the cracking spike) represents the effort required to initially open the valve and begin air delivery. Even at this testing depth the graph shows the low Work Of Breathing (WOB), indicating the diver is expending almost no energy in maintaining air flow. The cycle continues and the upper line (left to right represents the WOB whilst exhaling (greater due to increased gas density at depth). The total WOB is calculated by measuring the total area within the loop - 0.85 Joules per Litre, which reflects high performance at an exceptional price.
- Swivel turret body
- 4 medium pressure ports, 4 x 3/8" UNF
- 2 high pressure ports, 2 x 7/16" UNF
- Environmentally dry sealed system
- Polished chrome finish
- Balanced for superior performance
- Integrated venturi control
- Pneumatically balanced valve design
- Suitable for cold water use
- Bright Chrome Finish
- Right or Left hand hose configuration
- Two shot plastic front cover
- Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)
- New Optional Extra Hose Swivel connection
This means that the item is in stock and ready for despatch. We do make the odd mistake but 98% of items that say in stock, are actually in stock. If you are ordering a quantity of any item, you are welcome to email or phone to check the quantity available.
"Delivered in 10 Days"
This means that the item is in stock in our remote warehouse and will usually be delivered to you in 10 working days .
"Despatch 6-10 Days"
You are able to buy/order the item but just to advise you that the item is not currently in our warehouse and therefore not available for immediate despatch but is on order or en route to us and we hope to despatch within 6-10 Days. If you want to know more details just e-mail or phone us.
This may mean the item is no longer available or possibly out of stock for some time. If you want to know more details just e-mail or phone us.