ScubaPro 150CM LP Superflow Hose
ScubaPro 150CM LP Superflow Hose

ScubaPro 150CM LP Superflow Hose

Despatch in 6-10 Days
€72.33
Tax included
The Scubapro Superflow 150cm Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won't restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don't float in the water.

 

ScubaPro LP Superflow Hose 150cm

Product description:
  • 3/8" male thread will fit most regulator 1st stages today (except some Mares and older Apeks that use a 1/2" thread but you can read more about thread sizes here) and the female end is the universal 9/16” that fit all second stages without a swivel or special connection.
  • The female end is fitted with a high torque nut that requires a special tool to tighten properly.
  • 120CM 1.2m is a longer alternate hose to give you and your buddy a bit more space in an out of air situation without too much slack on a traditional setup.
  • Longer hoses like the 1.5m that is prefered for a long hose primary donate setup on a single cylinder but for a single cylinder alternate donate 1.2m is a good long option.
01.309.150
Comments (0)
No customer reviews for the moment.

Customers who bought this product also bought:

ScubaPro 90° Elbow Assembly ScubaPro 90° Elbow Assembly 2
Despatch in 6-10 Days
Regulator accessories

ScubaPro 90° Elbow Assembly

ScubaPro
11.101.004P
€54.89
The Scubapro 90 Degree Elbow is a small joint to fit to your second stage so you can route the hose out at a 90° angle.  Useful for long hose donate setups you can route the hose back more naturally wherever you want it to go with less strain on the hose.
ScubaPro 120CM LP Superflow Hose
Despatch in 6-10 Days
Regulator accessories

ScubaPro 120CM LP Superflow Hose

ScubaPro
01.309.048
€67.17
The Scubapro Superflow 120cm Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won't restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don't float in the water.

16 other products in the same category:

Apeks XTX DST 1st Stage Apeks XTX DST 1st Stage 2
Despatch in 6-10 Days
Regulators

Apeks XTX DST 1st Stage

Apeks
RT129116-P
€360.63
Four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose.
Mares DIN/Yoke Adaptor
Availability 5-10 days
Regulator accessories

Mares DIN/Yoke Adaptor

Mares
415861
€51.62
DIN to INT first stage conversion kit
ScubaPro Black Handle Valve
Despatch in 6-10 Days
Regulator accessories

ScubaPro Black Handle Valve

ScubaPro
14.151.003
€4.13
ScubaPro handle valve. It comes in black.
ScubaPro Din To Yoke Adapter
Despatch in 6-10 Days
Regulator accessories

ScubaPro Din To Yoke Adapter

ScubaPro
10.019.100
€95.07
SCUBAPRO’s Italian-made DIN to Yoke Adapter offers design improvements to make it more compatible with the shape and styling of newer regs. The yoke has no plastic cover and the nickel chrome plating is the highest quality, similar to what’s found on SCUBAPRO’s EVO Series regs.
ScubaPro 6M LP Superflow Hose
Despatch in 6-10 Days
Regulator accessories

ScubaPro 6M LP Superflow Hose

ScubaPro
01.300.240*
€249.03
The Scubapro Superflow Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won’t restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don’t float in the water.
ScubaPro First Stage Dust Cover INT & DIN ScubaPro First Stage Dust Cover INT & DIN 2
Despatch in 6-10 Days
Regulator accessories

ScubaPro First Stage Dust Cover INT & DIN

ScubaPro
10.101.211-P
€9.30
A dust cover for your first stage, keeping dirt & debris out and your regulator in tip top condition! This could be a life saver! Comes in either Din300 or Int232.
ScubaPro Re-Usable Clip In Blister
Despatch in 6-10 Days
Regulator accessories

ScubaPro Re-Usable Clip In Blister

ScubaPro
01.040.025
€5.08
Scuba Pro introduces a new concept in mouthpiece retainers. Instead of throwing away single-use plastic tie-wraps, this band can be used over-and-over again. Plus, with today's health issues, it's also ideal for students, classes, resorts and rental regulators.
ScubaPro 1M Nitrox LP Superflow Hose
Despatch in 6-10 Days
Regulator accessories

ScubaPro 1M Nitrox LP Superflow Hose

ScubaPro
01.310.035*
€54.77
Scubapro Nitrox medium pressure hose for 100 cm regulator. For connection between the 1st and the 2nd stage of your Nitrox regulator.
ScubaPro Neoprene Cover Second Stage
Despatch in 6-10 Days
Regulator accessories

ScubaPro Neoprene Cover Second Stage

ScubaPro
50.080.000
€19.63
Protect your valuable second stage from bumps and  scratches with a handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and  looks great while protecting your investment.
ScubaPro 100ft/30m S-Tek Spinner Spool ScubaPro 100ft/30m S-Tek Spinner Spool 2
Despatch in 6-10 Days
Regulator accessories

ScubaPro 100ft/30m S-Tek Spinner Spool

ScubaPro
40.202.100
€68.10
These premium spinner spools are super easy to use. The key to the spool’s user-friendliness can be found in the exclusive SCUBAPRO-branded spinner discs located at the center point of the spool that allow the discs to remain static while the spool spins and the line plays out.
ScubaPro 75CM Nitrox LP Superflow Hose
Despatch in 6-10 Days
Regulator accessories

ScubaPro 75CM Nitrox LP Superflow Hose

ScubaPro
01.311.031
€47.74
The Scubapro Superflow Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won’t restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don’t float in the water.

Customers who bought this product also bought:

ScubaPro 90° Elbow Assembly ScubaPro 90° Elbow Assembly 2
Despatch in 6-10 Days
Regulator accessories

ScubaPro 90° Elbow Assembly

ScubaPro
11.101.004P
€54.89
The Scubapro 90 Degree Elbow is a small joint to fit to your second stage so you can route the hose out at a 90° angle.  Useful for long hose donate setups you can route the hose back more naturally wherever you want it to go with less strain on the hose.
ScubaPro 120CM LP Superflow Hose
Despatch in 6-10 Days
Regulator accessories

ScubaPro 120CM LP Superflow Hose

ScubaPro
01.309.048
€67.17
The Scubapro Superflow 120cm Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won't restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don't float in the water.
Product added to wishlist