Shopping Cart
Availability 5-10 days
Apeks MTX-RC Stage 3
Despatched within 6–10 days
€949.63
Tax included
The MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water at a depth of over 60 metres.
Apeks MTX-RC Stage 3 Regulator
First Stage
Available in yoke or DIN configuration. Suitable for cold water use (below 10°C / 50°F) Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth. Over-moulded innovative endcap and environmental diaphragm, a forged 1st stage body offering maximum thermal performance. The 5th 3/8” UNF medium pressure port includes a protective bumper when not in use. Forged first stage body with heat exchanging ribs for maximum thermal performance. Angled HP ports for optimal hose routing and fitting of transmitters. Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation. Ribbed diaphragm clamp for improved heat exchange in cold water conditions. Double swivel hose for greater freedom of movement and comfort. Tested for Octopus use - EN250A cold water. Nitrox/Oxygen compatible – Up to 40% O² outside the EU (European Union), within the EU anything above 21% O² must use an M26 Connection.
Available in yoke or DIN configuration. Suitable for cold water use (below 10°C / 50°F) Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth. Over-moulded innovative endcap and environmental diaphragm, a forged 1st stage body offering maximum thermal performance. The 5th 3/8” UNF medium pressure port includes a protective bumper when not in use. Forged first stage body with heat exchanging ribs for maximum thermal performance. Angled HP ports for optimal hose routing and fitting of transmitters. Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation. Ribbed diaphragm clamp for improved heat exchange in cold water conditions. Double swivel hose for greater freedom of movement and comfort. Tested for Octopus use - EN250A cold water. Nitrox/Oxygen compatible – Up to 40% O² outside the EU (European Union), within the EU anything above 21% O² must use an M26 Connection.
Second Stage
High performance, pneumatically balanced, lever operated poppet valve. Large, diver friendly self-flushing controllable purge button. Front cover with over-moulded elastomer incorporates a formed chrome plated brass plate improving durability of the second stage. Large protective elastomer bumpers on the side and on the top to protect the second stage from impacts and scratches in the most vulnerable places. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water. Comfo-bite mouthpiece Double swivel hose Flexible nylon braided hose has better cold water performance than traditional rubber hose.
High performance, pneumatically balanced, lever operated poppet valve. Large, diver friendly self-flushing controllable purge button. Front cover with over-moulded elastomer incorporates a formed chrome plated brass plate improving durability of the second stage. Large protective elastomer bumpers on the side and on the top to protect the second stage from impacts and scratches in the most vulnerable places. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water. Comfo-bite mouthpiece Double swivel hose Flexible nylon braided hose has better cold water performance than traditional rubber hose.
RQ115111
In stock
The item is in our warehouse and ready to go. Orders placed before our daily cut-off are despatched the same working day; otherwise, the next working day. For larger quantities, please email or phone us to confirm availability.
Despatched within 6–10 days
The item is expected to be in the manufacturer’s stock. We'll despatch it to you as soon as it arrives — usually within 6–10 working days.
On backorder
The item is currently out of stock at the manufacturer’s warehouse and there is no confirmed delivery time available. We will place the order with the supplier and dispatch it when it becomes available.
Out of stock
The item is currently unavailable and not expected to be restocked in the short term. Please contact us for alternatives or further information.
No reviews
Comments (0)
No customer reviews for the moment.
4 other products in the same category:
Despatched within 6–10 days
€689.00
SCUBAPRO S-TEK Pure Back Plate / Wing System was designed for technical divers who subscribe to the DIR (Doing It Right) approach to streamlined and minimalistic equipment configurations.
Despatched within 6–10 days
€3,048.16
A reshaped and slimmer fit resulting in a less bulky drysuit. New longer and curved zipper, placed higher up on the shoulder to enhance upper body movement as well as providing effortless donning and doffing in an effort to boost the overall diving experience.
Despatched within 6–10 days
€49.90
The 4mm Base boot is an economical and durable boot built for temperate water diving and the rental market. The newly designed lightweight rubber sole is durable yet flexible while providing an effective anti-slip tread. Rubberized armor on the toe and heel cap offer lots of protection.
Tap to zoom
