Your cart
There are no more items in your cart
Xdeep HYDROS 50 DIR full set (steel backplate)
BC-004-0
In Stock
€428.00
Delivered in 10 Days
Perfect buoyancy for 2x12 twinset + stage
The buoyancy of HYDROS 50 wing totals 23 kg, thanks to which it is perfect for diving with 2x12 twinset and stage providing sufficient reserve of buoyancy in case of emergency.
-
Perfect buoyancy for 2x12 twinset + stage
The buoyancy of HYDROS 50 wing totals 23 kg, thanks to which it is perfect for diving with 2x12 twinset and stage providing sufficient reserve of buoyancy in case of emergency.
HYDROS 50 is a perfect wing for ambitious technical dives and will also work well for advanced recreational dives. 
Better trim and greater stability
HYDROS 50 model was built in such a way that its centre of buoyancy is placed on exactly the same level as the gravity centre of gas in the cylinder. Thanks to this, the trim does not change during the entire dive and remains the same with full and empty cylinders.
The geometry of HYDROS model, especially its contour, provides properly significant righting moment, which makes it a lot easier to reach the correct horizontal position.
Easy access to valves
To make access to the valves easier, we massively reduced the dead zone in the upper part of the bladder to the minimum. As a result, there is no "loose cloth" effect which makes access to valves difficult while doing a V-Drill.
The reduced bladder volume in the place where hoses are situated makes guiding them also much easier.
High surface position
In the HYDROS 50, we reduced to minimum the part which sticks out above the water while the diver is surfaced. Therefore, the significant part of the displacement is used effectively to keep the diver surfaced.
You will feel the difference during high wave dives at sea, especially when you have with you full stage cylinders.
Super-resistant Cordura®
The outer shell of the HYDROS model is made of highly durable Cordura® 1100 dTEX produced in Germany.
For safety reasons, no one needs to be convinced that you need a very durable outer shell for wreck diving.
Also, remember that the Cordura® fabric is definitely more abrasion-resistant than other materials. Compared to other wings made of less expensive materials, the HYDROS model stays NEW for a longer period of time.
Choose the inflator with optimal length
The comfort related to the use of inflator depends on its length. An inflator which is too long or too short may even cause the best wing or jacket to be uncomfortable to use.
Depending on your height, you need an inflator of greater or smaller length. When you order HYDROS wing, you can choose from three different lengths of the inflator hose: 14", 16" or 19". You are sure that your set will ideally match your needs.
Anti-bacterial coating
Have you ever wondered why scuba divers have so much sinus trouble?
Moisture inside the wing is an ideal place for bacteria, including the pathogenic ones. You know perfectly that sinus trouble can force you to refrain from diving for many weeks.
In order to reduce that risk, the inner bladder of ZEOS wing contains antibiotic agent preventing the development of bacteria.
"In Stock"
This means that the item is in stock and ready for despatch. We do make the odd mistake but 98% of items that say in stock, are actually in stock. If you are ordering a quantity of any item, you are welcome to email or phone to check the quantity available.
"Delivered in 10 Days"
This means that the item is in stock in our remote warehouse and will usually be delivered to you in 10 working days .
"Despatch 6-10 Days"
You are able to buy/order the item but just to advise you that the item is not currently in our warehouse and therefore not available for immediate despatch but is on order or en route to us and we hope to despatch within 6-10 Days. If you want to know more details just e-mail or phone us.
"Sold Out"
This may mean the item is no longer available or possibly out of stock for some time. If you want to know more details just e-mail or phone us.
No reviews
Tap to zoom
