AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator
AquaLung Leg3nd Mbs Regulator

AquaLung Leg3nd Mbs Regulator

RG148002
Despatch in 6-10 Days
€582.50
The first inhalation under water is the start of a new adventure. The revolutionary combination of Venturi effect and inhalation effort adjustment is natural and intuitive. Aqualung´s Master Breathing System allows divers tocontrol both in one simple rotation.
Model (INT/DIN)

 

AquaLung Leg3nd Mbs Regulator


First Stage

  • When the first stage is not connected to a cylinder valve, the Auto Closure Device (ACD) keeps the inlet shut to protect the first stage internal parts from contamination and corrosive water. 
                   Preserves the internal lubrication
    • Keeps the inlet filter clean and dry
    • Safer for elevated percentages of oxygen
  • Exceptional cold-water performance is achieved by modernizing Aqualung's three anti-freeze properties: Where there's no moisture, there's no ice: The LEG3ND's integrated dry chamber keeps inner components clean and dry by isolating them from the outside environment
  • Deep ribs create a large heat exchange surface area that helps to prevent ice forming on the mechanism (+30% vs Glacia / +70% vs Legend 2)
  • The new overmolded cap delays ice forming over the external diaphragm 
  • Auto-Balanced (also known as Over-Balanced)
  • Progressive increase of the working pressure to maintain optimum breathing efforts: Depending on the diver's depth, the working pressure of the first stage is automatically elevated to counteract the increased breathing air density
  • Ergonomically shaped DIN and YOKE screws made of a bi-material “Soft Grip” surface provide a better hold when installing or removing the first stage – especially with cold hands
  • Channeled YOKE screw to prevent water retention. Specialized ACD Dust cap attached to the regulator body to protect the inlet fitting and the ACD system from impacts or damage
  • Perfectly positioned HP and MP ports provide optimal hose routing

Second Stage

  • New front cover opening channels allow water to flow sideways over the diaphragm
    • Radial openings to prevent freeflows when diving in stronger currents
    • Openings widened to reduce peak inspiratory flow by an impressive 20%
  • New overmolded exhaust cover made of elastomer with a “soft touch” effect
  • Overmolded air purge
    • Wide surface area makes regulator purging easier
    • Purge depth controller optimizes air flow with minimal effort
  • Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably.
  • Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste.
  • The enlarged heat exchanger helps to prevent freezing of the second stage mechanism
  • Air channel deflector
    • Directs the air flow evenly during the inhalation phase
    • Streamlined bi-material deflector lowers the exhalation effort
  • Flexible and lightweight Aqua Flex hose with dual protectors
Specs:

First Stage

  • Type of first stage                     Overbalanced diaphragm design
  • Auto-Closure Device (ACD)     Yes
  • Number of HP ports                 2
  • Number of MP ports                 4
  • 1st Stage Flow Rate                1500 l/min
  • 1st Stage Weight in DIN          747 g
  • 1st Stage Weight in Yoke         957 g
  • Environmental Dry Kit              Permanent
  • First stage exterior                   Chrome over marine brass

Second Stage

  • Type of second stage                                    Pneumatically balanced
  • Controls                                                         Venturi switch combine breathing resistance
  • Breathing resistance - MBS                           Adjsutable and combine with venturi
  • Mouthpieces                                                  2ea. – A Comfo-Bite, installed, and a standard with bite wings in the box
  • Lip shield                                                       Included
  • Heat Exchanger for freezing resistance        Standard on all models
  • 2nd Stage Weight                                          227 g
  • Hose length                                                   730 mm
  • Overall work of breathing (WOB) scores       Avg. 0.70 joules/liter
  • Nitrox compatible                                           Yes, to 40% O2 when new, out of the box
instock_icon.png

"In Stock"

This means that the item is in stock and ready for despatch. We do make the odd mistake but 98% of items that say in stock, are actually in stock. If you are ordering a quantity of any item, you are welcome to email or phone to check the quantity available.

delivered_in_10_days.png

"Delivered in 10 Days"

This means that the item is in stock in our remote warehouse and will usually be delivered to you in 10 working days .

despatch_later.png

"Despatch 6-10 Days"

You are able to buy/order the item but just to advise you that the item is not currently in our warehouse and therefore not available for immediate despatch but is on order or en route to us and we hope to despatch within 6-10 Days. If you want to know more details just e-mail or phone us.

cancel.png

"Sold Out"

This may mean the item is no longer available or possibly out of stock for some time. If you want to know more details just e-mail or phone us.

No reviews
Product added to wishlist

In order to give you a better service DiveDepo uses cookies. By continuing to browse the site you are agreeing to our use of cookies. More Information